FireStopperInternational logo

tag-line

FireStopper International and FireStopper Chemicals and Technologies Company, Inc. created the quintessential firefighting and suppression technology for the 21st Century.
  • Technologies: FFC/EnviroSafe

  •   • Liquid and Clean • Non-Toxic
     
    • Non-Irritant
     
    • Environmentally Safe

 


  • The World’s First Residential Kitchen (K)   Rated all purpose liquid fire Extinguisher

FireStopper®
AB-40002 (FFC)

Technology: Fire Fighting Catalyst (FFC)™

  • DESCRIPTION:
  • CONCENTRATE (A High Kinetic Active Foamer)
  • • USAGE: .5% to 100% (.2% For Training)
  • • CLASS: A B C/E, D & K/F, (E&F: EU)

The FFC, is a proprietary Trade Secret Technology and formulations, within the meaning of the Uniform Trade Secret Act ("UTSA”) Cal. Civ. Code Sec. 3426, Common law, Business and Profession §17200 and all other applicable statues.

This FFC, Anti-Explosive and Bio-Remedial Technology, combines multiple fire suppression and barrier production environments that deliver deep penetration with tremendous endothermic capability to fully extinguish the hazard.

The family of FFCs are the only A, B, C/E, D, K&F fire-fighting product in the market that deliver faster knockdown, no flash back, faster cool down and fully reliable post fire security.


CLASS-ACLASS A

Structure Fires: Fast knockdown and extinguishment occurs applying a direct exterior & interior attack method to the involved fire surfaces and ceilings.

The FFCs totally prevent the thermal inversion phenomenon unlike water & class A-foams that convert into steam, rising through the thermal column and then release the trapped hydrocarbons at the ceiling as they ignite, creating a deadly fire hazard.

"Ordinary combustible" fires are the most common type of fire, and are designated Class A under both systems. These occur when a solid, organic material such as wood, cloth, rubber, or some plastics become heated to their flash point and ignite. At this point the material undergoes combustion and will continue burning as long as the four components of the fire tetrahedron (heat, fuel, oxygen, and the sustaining chemical reaction) are available.

The FFC's retardant properties instantly penetrate deeply through the surface to the fiber, significantly reducing surface and area temperatures thus eliminating re-ignition.

CLASS-B CLASS-k/F CLASS B & K/F

FFCs are fully effective on all hydrocarbon fuels, Polar, Non-Polar, Fats and Vegetable Oils, providing instant post fire retardant reliability and unmatched cooling capability. No Emulsification makes clean up fast, easy and Non-Hazardous.

Flammable or combustible liquid or gaseous fuels. The US system designates all such fires "Class B". In the European / Australian system, flammable liquids are designated "Class B", while burning gases are separately designated "Class C". These fires follow the same basic fire tetrahedron (heat, fuel, oxygen, chemical reaction) as ordinary combustible fires, except that the fuel in question is a flammable liquid such as gasoline, or gas such as natural gas.
Fires that involve cooking oils or fats are designated "Class K" under the US system, and "Class F" under the European / Australasian systems. Though such files are technically a subclass of the flammable liquid/gas class, the special characteristics of these types of fires are considered important enough to be recognizing separately.
CLASS-C/ECLASS C/E

FFCs are the only available and reliable products to quickly and fully extinguish Electric Transformer fire hazards. Class C/E listing is dependent on the hardware system. [FFCs are accredited at 100kv (US) and 35kv (EU) testing]

Electrical fires are fires involving potentially energized electrical equipment. The US system designates these "Class C"; the European/Australian system designates them "Class E". This sort of fire may be caused by, for example, short-circuiting machinery or overloaded electrical cables.
CLASS-DCLASS D (METALS)

(Lithium Or Sodium Metals Excluded)

Applied directly on to the metal fire source will rapidly contain, cool and extinguish the hazard.

Certain metals are flammable or combustible. Fires involving such are designated "Class D" in both systems. Examples of such metals include sodium, titanium, magnesium, potassium, steel, uranium, lithium, plutonium, and calcium. Magnesium and titanium fires are common.

  • FOREST & WILD FIRES AB 40002(FFC) Application:
    1. Airdrop: to secures fire parameters and prevent fire-crowning effect, etc.
    2. Land base application:
      1. stop fire progress
      2. create firebreak
      3. post fire cleanup
    3. Pretreatment on structures to prevent ignition and to protect against oncoming fires, reducing property and collateral damage.
    4. Batch mixing for better logistics access
    5. Usable through all available equipment

  • ADVANTAGES
    • Non-toxic, non hazardous and non-corrosive
    • Biodegradable
    • Usable with all existing fire equipment
    • Anti-explosive properties
    • No unpleasant odor
    • Can be used with sea and brackish water
    • Can be used at .1% to 100% as needed
    • Great temperature reduction i.e.(>1500° F in < 40 sec.)
    • Garments do not require detoxification
    • Compatible with all other wet and dry chemicals
    • Can be batch mixed and safely run through conventional pumps
    • Eliminates the need for expensive foam generating equipment
    • Superior performance on all Class A, B,C/E, D, and K/F fires
    • Effective on marine fires and will adhere to surfaces such as fiberglass, etc.
ENVIRONMENTAL AND TOXICOLOGY TESTING

# AB 40002 (FFC) was independently tested and found to be non-hazardous to fish. The mixture is not an eye or skin Extinguisherand is non-toxic when tested according to the FHSA protocols. It is judged to pose no chronic health hazard.

Under European standards (OECD 301 part A-E), FFC's meet "green” qualification. The FFCs require no special labeling or chronic health hazard warning statements and comply with FHSA regulations, 16 CFR 1500 and California Proposition 65.


SPECIFICATION/APPLICATION

AB 40002 (FFC) has a water-thin viscosity, making it ideal for fire suppression systems and manual applications to fight the broadest range of class A B C/E D (Lithium or Sodium metals excluded) & K/F fires. In direct contrast to the older foam technologies, FFCs Can Be Batch Mixed And Also Proportioned from .1% to 100%. These proportions allow for greater flexibility in use,savings in time, storage, and capital

  • APPLICATIONS:
    • Condensation Towers
    • Storage Tanks
    • Pipe Lines
    • LPG Transports
    • Tires & Rubber
    • Vehicles: Interiors & Exteriors
    • Flammable Metals
    • Military Applications
    • Transformers
    • Mines
    • Sprinkler Systems
    • Transportation
    • Warehouses
    • Docks & Spills
    • Structural
    • Forest & Wildfires
    • Aero Space
    • Cargo Holds
    • Drop-In Halon Replacement *& More.
AB 40002 (FFC) AT .2% IS IDEAL FOR ALL TRAINING DEMANDS. (FOR ALL OTHER APPLICATIONS, END USER SHALL DETERMINE BEST USE PERCENTAGES)



STORAGE AND HANDLING

Store in original sealed containers or poly tanks,stainless steel tanks and mild steel tanks. (This FFCs Should Never Be Stored In Aluminum Containers) Storage tanks should be sealed to prevent evaporation. A food grade biocide maybe added to maintain a premix for medium to long-term storage and use. (TO BE DETERMINED BY THE END USER)

TECHNICAL SPECIFICATIONS
pH@ 25° C: 7.2 – 7.9
S.G. @ 25° C: 1.100 – 1.200
USABLE TEMPERATURE RANGE:
-20° C to < 65.5° C (-4° F to <150° F)
Appearance: Water thin, slight hazy to clear
Color: Light amber to clear
~WARRANTY~

10 YEARS WHEN STORED WITHIN THE RECOMMENDED TEMPERATURE WHILE IN THE UNDAMAGED, FACTORY SEALED, ORIGINAL CONTAINER.

~WARNINGS~

DO NOT EXCEED STORAGE TEMPERATURES:-20° C to 48.8°C (-4° F to 120° F)
FFCs are compatible for use with all other existing commercial fire fighting products. FFCs should be disposed in accordance with applicable regulations. Collect spills in plastic or steel containers.

DO NOT MIX WITH CHLORINE BLEACH (HYPOCHLORITE).
KEEP CONTAINERS CLOSED TO PREVENT EVAPORATION.


• IMPORTANT NOTICE TO PURCHASER: ANY ALTERATION TO THE ORIGINAL FORMULA, EXCEPT FOR ITS INTENDED END USE, SHALL VOID ANY AND ALL WARRANTIES OF PRODUCT. The following is made in lieu of all warranties, expressed or implied, including the implied warranties of merchantability and fitness for purpose: Sellers and manufacturer's only obligations shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product for its intended use, and user will assume all risk and liability whatsoever in connection therewith. NEITHER SELLER NOR MANUFACTURER SHALL BE LIABLE IN TORT OR IN CONTRACT FOR ANY LOSS OR DAMAGE DIRECT, INCIDENTAL OR CONSEQUENTIAL, ARISING OUT OF THE USE OF OR THE INABILITY TO USE THE PRODUCT.